¶ HYPERLOK®
¶ High Temperature 3D Printing Adhesive
HYPERLOK® is KPD's premium 3D print bed adhesive designed for high-temperature and challenging materials. While specifically engineered for high-warp materials like PEEK, Ultem (PEI), and Polyamide (Nylon), it can also be used with lower temperature materials depending on your build surface.
Developed by industry-leading engineers and validated by high-temperature machine operators and 3D printer OEMs for industrial applications.
SAFETY INFORMATION
⚠️DANGER FLAMMABLE!🔥
-Keep Bottle away from Extreme Heat or Flame, HyperLok is Flammable!
-Please do NOT store your bottle on your Printer Enclosure.
This product is considered a highly flammable liquid and vapor that has the potential to cause serious eye irritation and may lead to drowsiness or dizziness. To ensure safety, the product should be kept away from heat, sparks, open flames, and hot surfaces, with smoking prohibited near it. The container needs to be tightly closed during storage. Mist, vapors, and sprays should not be inhaled and hands washed thoroughly after handling. Use only in a well-ventilated area.
-In case of skin or hair contamination, rinse the skin with water.
-If the product comes into contact with the eyes, rinse with water for several minutes and remove contact lenses if applicable. Should the irritation persist, a POISON CENTER or a doctor should be contacted for medical attention.
-In case of fire, use water spray, alcohol resistant foam, dry powder, or CO2 to extinguish it. The product should be kept in a well-ventilated, cool place while in storage.
⚠️BUILD SURFACE DISCLAIMER
-KPD and HYPERLOK® Resellers are NOT Responsible for Build Plate Damage.
-Please ONLY use on Approved Build Plate Surfaces
-Could Chip Glass! Use IPA around edge of part to help release if needed.
-HyperLok is a viscous liquid that should be applied to a COOL Build Plate
¶ Documentation & Purchase
¶ Build Surface Compatibility
¶ ✅ Approved Surfaces
- Carbon Fiber
- Garolite/Bakelite
- PEI Sheet
- PEI Powder Coated
- PEEK Plate
- Steel Sheet (TPU/Flexible materials only)
¶ ❌ Unsupported Surfaces
- Glass Plate
- Plastic Textured Film/BuildTak
- Polypropylene (untested)
¶ Application & Refill Instructions
Choose your applicator type below for detailed instructions:
¶ Support & Feedback
We value your feedback! Please share your experience:
KPD HYPERLOK® - Your Reliable Solution for 3D Print Bed Adhesion.